Scalar Function

[DOHCTOR_32V]

Hello, could someone please give me a brief explanation of what the pictured scalars do in relation to the injector timing table? Thanks

[decipha]

It bypasses the injector timing table and sets injector timing to 500 at idle and in neutral

[DOHCTOR_32V]

Cool. Thank You

[DOHCTOR_32V]

What happens with the table and injector timing when out of idle, and in drive? Does "Frequency Input Falling Edge" log this?

[decipha]

Those scalars don't get used and the table does instead.

No thats for the moates superlogger device

[DOHCTOR_32V]

Super! Thank You for the insight.

[DOHCTOR_32V]

decipha, just to be sure these parameters are dependent on one another, I'd like to ask ... from the attached picture, does changing these two switches to "un-set" cause the other two, 500 degree injector timing values to have no effect? I only want the Injector Timing table and Injection Timing ECT modifier to be used. I'm not currently using 500 degrees in my table.

[decipha]

correct

[DOHCTOR_32V]

I appreciate your shared knowledge. Thanks