Anyone have any idea why the OD light is flashing. I auto swapped my 5 speed Mach 1. It is controlled by a Quick 4 because I didnt have an auto ECU from a Mach 1 (hard to get it seems and pricey too). Im in Canada so the price is even worse for me and I got the Quick 4 used here in Canada.
Are there any parameters I can check in this strategy to disable in case I inadvertently turned something on?
OD light flashing
-
Canuckstang
- Posts: 90
- Joined: 2021 May 17, 12:31
- Location: Rothesay New Brunswick Canada
- Vehicle Information: 2003 Mustang Mach 1
4.6 4V
AMZ2
Single ON3 70mm turbo
Auto swapped 4r75W with 3800 stall Circle D running off a quick 4 controller.
Forged 4.6 4v. CR 8.5:1, stock heads
Tuner Pro RT
Quarterhorse
wbo2-AEM_UEGO (+0.02)
-
decipha
- Posts: 6384
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'25 F-150 5L
Re: OD light flashing
mach and gt ecus are the same
are you using the mach manual cal?
are you using the mach manual cal?
-
Canuckstang
- Posts: 90
- Joined: 2021 May 17, 12:31
- Location: Rothesay New Brunswick Canada
- Vehicle Information: 2003 Mustang Mach 1
4.6 4V
AMZ2
Single ON3 70mm turbo
Auto swapped 4r75W with 3800 stall Circle D running off a quick 4 controller.
Forged 4.6 4v. CR 8.5:1, stock heads
Tuner Pro RT
Quarterhorse
wbo2-AEM_UEGO (+0.02)
Re: OD light flashing
Yes I have since read that the GT ECU is the same...I'd like to get away from the quick 4 and just control the trans with the ecu. I need the wiring harness too...but thats besides the point...Any year that is preferred over another?
Yes I am using the mach manual cal....AMZ2
Yes I am using the mach manual cal....AMZ2