Non-Intetcooled Turbo Setup

For all other non specifically listed ECU tuning. This would include can-bus ecu's such as powerpc copperhead tricore and siemens ecus. As well as GM, Dodge or any aftermarket controller tuning etc...
Post Reply
Novi347
Posts: 2
Joined: 2022 Nov 17, 23:28
Location: Gilbert, Arizona
Vehicle Information: 1990 Foxbody (Original Owner)
363 Turbo Build in Progress.
*Last Setup: 349 Novi2000

Non-Intetcooled Turbo Setup

Unread post by Novi347 »

After over 24yrs of supercharging, I'm making a switch to a Turbo combination. Just ordered an FIS GTRS47696 for my 363 build. Question is for individuals who use meth injection solely instead of intercooling? I've had great success doing it on my Blown application in the AZ summer. At full boost of 20lbs my IATs were steadily in the 90 deg range. What type of IATs do turbos reach when street driving? Thanks in advance!
Top
decipha
Posts: 6384
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: Non-Intetcooled Turbo Setup

Unread post by decipha »

I've never ran a turbo setup without an intercooler but should be pretty similar if not just a touch more.

You'll be good.
Top
Novi347
Posts: 2
Joined: 2022 Nov 17, 23:28
Location: Gilbert, Arizona
Vehicle Information: 1990 Foxbody (Original Owner)
363 Turbo Build in Progress.
*Last Setup: 349 Novi2000

Re: Non-Intetcooled Turbo Setup

Unread post by Novi347 »

Ok, Thank you. Tried asking guys at FIS, he said exhaust housing can reach up to 2000 deg. I Assumed that was at full load.
Top
decipha
Posts: 6384
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: Non-Intetcooled Turbo Setup

Unread post by decipha »

The turbine housing gets pretty hot but not so much for the compressor housing.
Top
Post Reply

Return to “PCM / ECU / EEC Tuning”