EFIDynoTuning Forum

Hello. I tried write zYA2 into my mach1. After write complete(pcm flash), fuel pump ticking with ignition on. I tried identicication button in my pcm flash, pcm flash display error on vin and strategy, immo light on, radiator fan activate with ignition on, sym2 same problem but AMZ_stock, MGZT_stock works without problem. I only insert vin and pats code into all bins.I was not tried start car...
Attached picture from amz2 write...on zya2 is ERROR status at strategy and vin location...

bin has to be 224k for pcmflash to write

you need to tune it with tunerpro and the qh first before you write it

256k bin open in tuner pro, insert vin amd pats after closed tuner pro was convrted to 224...with amz2 works

the code at 1319b is all corrupted

Are you using tool from custom ecm solutions to swap the banks?

Yes. Picture attached higher.

decipha wrote: ↑2022 Dec 05, 19:00 the code at 1319b is all corrupted

Wrongly converted to 224?
How I can fix it?
78?

your missing a ton of code. You have to put the missing code back in.

decipha wrote: ↑2022 Dec 06, 02:02 your missing a ton of code. You have to put the missing code back in.

Code lost after converter convert bin to 224? Converter not work properly? I Need used another converter or manual bank swap? Couldnt you convert 256 to 224 right way for my please? I will compare, search differences because now I dont have idea where code missing...why code lost. SORRY for many questions.

Couldnt these problems here for reason I not have US regional setting in my pc, binary editor works only if pc set on US regional setting in windows.