Page 3 of 5
Re: 03/04 Mach 1
Posted: 2022 Aug 23, 11:19
by bad86capri
Thanks!
Re: 03/04 Mach 1
Posted: 2022 Sep 13, 09:11
by bad86capri
decipha wrote: ↑2022 Aug 03, 13:37
I'll post a stock fbgi0 mach1 tune file soon as I get a chance
Hey Decipha have you had a chance to post dig up your stock mach 1 tune?
Re: 03/04 Mach 1
Posted: 2022 Sep 13, 12:22
by decipha
Nope and I won't get any free time to get to it anytime soon most likely.
Re: 03/04 Mach 1
Posted: 2022 Sep 14, 12:49
by bad86capri
I just finished my startup tune for the mach. The car has a 3650 trans, stock 3.55 gears, longtubes and a X-pipe so i applied the patch for only 1 hego and i applied the patch to disable the rear hegos. I turned off the EGR and disabled the PATS as well. Do you mind looking over it when you get a chance? I want to make sure im not missing anything. Thanks again for your support!
Re: 03/04 Mach 1
Posted: 2022 Sep 15, 12:58
by bad86capri
Heres a revised tune. The one i posted yesterday did not have have DeltaP data updated.
Re: 03/04 Mach 1
Posted: 2022 Sep 15, 12:59
by bad86capri
Re: 03/04 Mach 1
Posted: 2022 Sep 15, 15:03
by decipha
what injectors do you have?
read out and post back your stock tune to copy pats over
Re: 03/04 Mach 1
Posted: 2022 Sep 19, 07:32
by bad86capri
Im using the stock 24s. When i get to that point i will read out the stock tune and post back.
Re: 03/04 Mach 1
Posted: 2022 Sep 19, 07:34
by bad86capri
The data for the injectors i got off of the homepage and deltaP info from factory ford data sheet.
Re: 03/04 Mach 1
Posted: 2022 Nov 08, 22:36
by bad86capri
I finally got the mach together and im planning on starting the tuning process tomorrow. Is FN2200 the base spark table? if so is the easiest way to convert it to a N/A 4valve is add 11 degrees to the whole table?