Ford PKCP0A8 OEM BIN needed

For all other non specifically listed ECU tuning. This would include can-bus ecu's such as powerpc copperhead tricore and siemens ecus. As well as GM, Dodge or any aftermarket controller tuning etc...
034v
Posts: 101
Joined: 2021 Feb 22, 09:00
Location: Denton TX
Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost

Ford PKCP0A8 OEM BIN needed

Unread post by 034v »

GL3A-14C204-TF box

Need for PCM Flash if anyone has it. OEM...

LMK thanks
decipha
Posts: 6384
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: Ford PKCP0A8 OEM BIN needed

Unread post by decipha »

what year make model engine and trans? Post your read out file so someone can take a look and maybe cross reference and find it if they have it.
034v
Posts: 101
Joined: 2021 Feb 22, 09:00
Location: Denton TX
Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost

Re: Ford PKCP0A8 OEM BIN needed

Unread post by 034v »

I believe 16 F150 eco 6R truck.

Don't have a readout. It was sct flashed and the customer left his door unlocked and tuner in truck.
034v
Posts: 101
Joined: 2021 Feb 22, 09:00
Location: Denton TX
Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost

Re: Ford PKCP0A8 OEM BIN needed

Unread post by 034v »

I can get a readout of the flashed box tomorrow on PCM Flash if that helps. Just need an oem (or corrected revamp of the flash) one so I can load a tune with his replacement tuner he's getting.
decipha
Posts: 6384
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: Ford PKCP0A8 OEM BIN needed

Unread post by decipha »

yeah readout would help

why do you need to revamp anything if hes going to be erasing it with a tuner anyway?
034v
Posts: 101
Joined: 2021 Feb 22, 09:00
Location: Denton TX
Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost

Re: Ford PKCP0A8 OEM BIN needed

Unread post by 034v »

decipha wrote: 2025 Feb 08, 19:43 yeah readout would help

why do you need to revamp anything if hes going to be erasing it with a tuner anyway?
Can't take a new tune if it's got a current flash. He didn't download the stock file from the device.

At least this is what I've dealt with in the past. Without an OEM flash on the PCM, the (new) x4 or BDX won't load a tune.

Make sense?
034v
Posts: 101
Joined: 2021 Feb 22, 09:00
Location: Denton TX
Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost

Re: Ford PKCP0A8 OEM BIN needed

Unread post by 034v »

I have this one from a 13 3.5 eco/6R 2wd. Similar hardware, different FoMoCo PN. I will get the 16 later today but it will be a tuned readout.

Not sure if this will matter or not. Also attached a mockup XDF for verification reasons.

Details: Bosch MEDG17.0 / DL3A-14C204-ADA / DG170_300_0801 / KGCV5F5 / DSD0 Cal ID
Attachments
DL3A-14C204-AHA.xdf
(20.46 KiB) Downloaded 263 times
STOCK_TUNE_DL3A-14C204-AHA_-20231104-110639.bin
(4 MiB) Downloaded 307 times
decipha
Posts: 6384
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: Ford PKCP0A8 OEM BIN needed

Unread post by decipha »

No that makes zero sense. Who told you it cant take a tune because it has something on it now? Only time it wont be able to recognize it is if someone obfuscated the cal tag. You dont want to use anyone that tunes like that as obviously they have something to hide.
034v wrote: 2025 Feb 09, 09:37
decipha wrote: 2025 Feb 08, 19:43 yeah readout would help

why do you need to revamp anything if hes going to be erasing it with a tuner anyway?
Can't take a new tune if it's got a current flash. He didn't download the stock file from the device.

At least this is what I've dealt with in the past. Without an OEM flash on the PCM, the (new) x4 or BDX won't load a tune.

Make sense?
034v
Posts: 101
Joined: 2021 Feb 22, 09:00
Location: Denton TX
Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost

Re: Ford PKCP0A8 OEM BIN needed

Unread post by 034v »

Well either way, when I've tried 2 or 4 bank ECU's that were already flashed with a different or same brand device it wouldn't take a flash. It would come up as unable to flash on screen and some BS error. I'm assuming the 4096k ECU's would be the same.

Ill try and post the bin later for the one in question.
Post Reply