Innovate LM-2 transfer function

[DOHCTOR_32V]

Hello, could someone please post the proper transfer functions for lambda and AFR for the LM-2 wideband? I did not see it listed on EFIDynoTuning web page nor did I find it in a search on this board. Thanks

[decipha]

not sure where you were looking but it shows it there

http://www.efidynotuning.com/config.htm

lc1 and 2 both are wbo2_innov

[DOHCTOR_32V]

This wideband is the LM-2, not the LC. I believe I have previously used (3.008*x+7.35) as the transfer function for AFR. It appears (7.35 + ( X / 4267 )) / 14.64 for AFR, and (0.2046 * (X/12800) ) + 0.5 for lambda may be useable but have not had the chance to test these yet. If these are incorrect, please advise.

[decipha]

22.39 max / 14.7 == 1.523
7.35 min / 14.7 == 0.5

Thats the same as all other innovate.

WB_LC1/2_MTX-L/DLG-1 is correct.

[DOHCTOR_32V]

Cool, Thanks for boiling it down so simply!

[decipha]

yeah no prob, anytime