Page 2 of 2
Re: Lopping at idle
Posted: 2023 Nov 28, 20:26
by MPCOBRA
I wasn't closing it, I opened it more. The TPS and IAC was unplugged when I made the adjustment the truck was just under desired RPM at idle, about 700 RPM then I turned the engine off and plugged everything back in and tired to start the truck and would not do anything but crank. It was turning over like I had the pedal to the floor. That's never happened before until I loaded the last tune in it.
Re: Lopping at idle
Posted: 2023 Nov 28, 21:36
by decipha
Well that obviously has nothing to do with the tps.
You obviously need more crank pw when hot.
Go kick up the crank pw at operating temp by 35%
Re: Lopping at idle
Posted: 2023 Nov 30, 11:15
by MPCOBRA
Should I have erased KAM memory before I loaded the last tune you sent me ? or dose that really matter.
Re: Lopping at idle
Posted: 2023 Nov 30, 12:04
by decipha
Shouldn't matter but can't hurt.