Borderline knock table with boost
-
Tmkllr
- Posts: 2
- Joined: 2021 Feb 23, 22:39
- Location: Hocking Hills Ohio
- Vehicle Information: 66 Mustang coupe
92 5.0
T5
Explorer rear
T trim Vortech
GT40 heads
Trickflow cam
Borderline knock table with boost
My car has been sitting a few years and the tune went corrupt. Excited to start over with the latest and greatest. Just down to the timing now for a good baseline. The old tune was using seal level spark table. I've read what I can about the FN2200 Borderline knock table, but still don't understand the y-axis values. Car is supercharged.
-
decipha
- Posts: 5094
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Borderline knock table with boost
its LOAD
load is volumetric efficiency. The more boost the more load.
Did you read the spark write up on the homepage?
load is volumetric efficiency. The more boost the more load.
Did you read the spark write up on the homepage?
-
Tmkllr
- Posts: 2
- Joined: 2021 Feb 23, 22:39
- Location: Hocking Hills Ohio
- Vehicle Information: 66 Mustang coupe
92 5.0
T5
Explorer rear
T trim Vortech
GT40 heads
Trickflow cam
Re: Borderline knock table with boost
Been studying everything. Somehow the y axis values changed on me. I'm starting over with a fresh A9L2 download. I think I follow what to do for now. Thanks a ton.