'95 GT stock 302 Vortech V1 FLOODING no start

Covers all sn94/95 mustang v8 ecu's.
Post Reply
red5.0fogger
Posts: 150
Joined: 2021 Mar 22, 15:58
Location: Newington CT
Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s

Re: '95 GT stock 302 Vortech V1 FLOODING no start

Unread post by red5.0fogger »

Cool, so now where are you at with it? Does it idle?
Top
dakotagatlin
Posts: 11
Joined: 2021 May 07, 18:41
Location: Huntsville, AL
Vehicle Information: 1995 Mustang GT Vert; Stock 302 bottom, GT40p Heads, 1.7RR, Explorer Intake
1995 Mustang GT; 302 bottom(milled crank for larger bearings), E7 heads, Vortech V1, 80lb Siemens, Explorer Intake, Aeromotive1000 Regulator

Re: '95 GT stock 302 Vortech V1 FLOODING no start

Unread post by dakotagatlin »

I was able to get it to idle. And some part throttle. Had a couple other issues arrise. Maf is fluctuating up and down in 22-34 point swings.
I tried reclocking, to not much avail. Currently back at work,I only get time on weekends
Top
red5.0fogger
Posts: 150
Joined: 2021 Mar 22, 15:58
Location: Newington CT
Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s

Re: '95 GT stock 302 Vortech V1 FLOODING no start

Unread post by red5.0fogger »

My maf is done in volts, but i think it's to be expected to move a bit. Decipha likes to have plastic screen before and after the maf sensor, it straightens out the airflow and helps settle the reading. (household plastic window screen. )
Top
Post Reply

Return to “CBAZA - 94/95 Mustang V8 ECUs”