ECT Payload

Any TunerPro specific issues belong here.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

ECT Payload

Unread post by bad86capri »

Im working with the FBGIO strategy on a 2003 Mach1. The temp gauge on the dash is reading correctly but the payload on the dashboard in tunerpro is reading -214. I checked the transfer curve and compared it with two different bins and it looks normal. Any ideas what might cause this?
decipha
Posts: 4958
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: ECT Payload

Unread post by decipha »

Did you enable the dma datalogging patch?
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: ECT Payload

Unread post by bad86capri »

I believe so. I'll check when I get to the garage. Everything else seems to be working. It is showing FRP fail and STALL on the top right side of the dashboard. I'm also getting a #2 injector fault flag. So I'm not sure if all of these things are related.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: ECT Payload

Unread post by bad86capri »

I didnt have patch enabled.
Post Reply