EFIDynoTuning Forum

I noticed that AHISL in my .bin was ~240 but it ran fine. Changing it to the right # resulted in a no start. The FBGI0_200510.xdf shows the right value.
FBGI0_200510.xdf AHISL address: 21FFE
FBGI0_210226.xdf AHISL address: 2FFFE

I deleted and downloaded FBGI0_210226 again because I've been editing an .xdf with multiple tunerpro windows open and might have edited in the wrong window. Can anyone confirm this? I was thinking Decipha kept ahisl in a ram address on his stuff and the 2nd one isn't in ram.

no the high slope cant be ram

that is the correct address for all eec-v.

240 means your using the outdated datalogging patch code

set your high slope and enable datalogging and off you go