trying to dial this tune in. could some one check it over please

Decipha's custom GUFX strategy covers all 89-93 foxbody ecu's including the 88 mass-air california ecus.
jcbryant
Posts: 54
Joined: 2021 Jun 04, 17:11
Location: Jefferson City, MO
Vehicle Information: 2015 5.0 from F150
2016 mustang pcm strategy FPGP6KS
2.9 whipple
132mm whipple throttle body
1050X injector dynamics
fore dual fuel pumps with return fuel lines
long tube headers
91 octane

2013 F150 3.5 ecoboost

2006 F350 6.0 Powerstroke

trying to dial this tune in. could some one check it over please

Unread post by jcbryant »

87 mustang 5.0 automatic. Converted to MAF, PCM A9M, ford orange 19lbs injectors, stock maf and housing. Suppose to have a Ford racing E303 cam.
I have a wideband in the exhaust but is not wired to pcm for logging.
Getting the MAF dialed in. adjusted ISC gain for hunting idle when hot start.
A big issue this car was having. when shifting into drive or reverse and when coming to a stop. the brakes would have to be applied very hard to keep the car moving. I've gotten it to do better. Wondering if there is anything I can do.

Thanks
test drive1.zip
(100.55 KiB) Downloaded 24 times
A9L2_220212 v1.zip
(24.45 KiB) Downloaded 39 times
decipha
Posts: 2909
Joined: 2021 Feb 15, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: trying to dial this tune in. could some one check it over please

Unread post by decipha »

Hunting idle on hot start wouldn't be the isc gain it would be the target isc duty cycle table. Simple kick it up to get the rpm to dsdrpm. If dsdrpm is too low then the dsdrpm needs to be kicked up.

Your using the wrong adx file its severely outdated and not logging correctly. Where did you get it ? Download the latest files from the downloads here.

Otherwise you have a 10% global fuel correction. She looks stock.

btw you don't have to compress bin for xdl files as they are already compressed
Attachments
jcbryant_autofox.bin
(56 KiB) Downloaded 28 times
jcbryant
Posts: 54
Joined: 2021 Jun 04, 17:11
Location: Jefferson City, MO
Vehicle Information: 2015 5.0 from F150
2016 mustang pcm strategy FPGP6KS
2.9 whipple
132mm whipple throttle body
1050X injector dynamics
fore dual fuel pumps with return fuel lines
long tube headers
91 octane

2013 F150 3.5 ecoboost

2006 F350 6.0 Powerstroke

Re: trying to dial this tune in. could some one check it over please

Unread post by jcbryant »

Thank you
I’ll work on the desired rpm once I get the Maf closer
I got the adx from here
viewtopic.php?t=18
Thanks for info on the bin and xdf being compressed.
jcbryant
Posts: 54
Joined: 2021 Jun 04, 17:11
Location: Jefferson City, MO
Vehicle Information: 2015 5.0 from F150
2016 mustang pcm strategy FPGP6KS
2.9 whipple
132mm whipple throttle body
1050X injector dynamics
fore dual fuel pumps with return fuel lines
long tube headers
91 octane

2013 F150 3.5 ecoboost

2006 F350 6.0 Powerstroke

Re: trying to dial this tune in. could some one check it over please

Unread post by jcbryant »

Thank you
I’ll work on the desired rpm once I get the Maf closer
I got the adx from here
viewtopic.php?t=18
Thanks for info on the bin and xdf being compressed.
decipha
Posts: 2909
Joined: 2021 Feb 15, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: trying to dial this tune in. could some one check it over please

Unread post by decipha »

i just posted some new files but im thinking it might not be logging correctly if you don't have the latest version of tunerpro

snatch the new files just in case though, adx and xdf
jcbryant
Posts: 54
Joined: 2021 Jun 04, 17:11
Location: Jefferson City, MO
Vehicle Information: 2015 5.0 from F150
2016 mustang pcm strategy FPGP6KS
2.9 whipple
132mm whipple throttle body
1050X injector dynamics
fore dual fuel pumps with return fuel lines
long tube headers
91 octane

2013 F150 3.5 ecoboost

2006 F350 6.0 Powerstroke

Re: trying to dial this tune in. could some one check it over please

Unread post by jcbryant »

Used the Bin jcbryant autofox bin you posted. Also went and downloaded the ADL and XDF files again.
cars is running great. Had to tweak the maf at idle a little. Fuel error looks to be under 5%. Car runs great. getting ready to check cold start.
Were the issues all software related or did I have some things wrong?
Thank you. I really appreciate all your help. It can be very complicated but I'm learning a lot.
decipha
Posts: 2909
Joined: 2021 Feb 15, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: trying to dial this tune in. could some one check it over please

Unread post by decipha »

neither

she just needed a 10% global correction was all.

Biggest change was probably setting it for an automatic so it uses the neutral target iscdc table and swaps to my custom drive target iscdc table when thrown in gear to make the transition much more stable
jcbryant
Posts: 54
Joined: 2021 Jun 04, 17:11
Location: Jefferson City, MO
Vehicle Information: 2015 5.0 from F150
2016 mustang pcm strategy FPGP6KS
2.9 whipple
132mm whipple throttle body
1050X injector dynamics
fore dual fuel pumps with return fuel lines
long tube headers
91 octane

2013 F150 3.5 ecoboost

2006 F350 6.0 Powerstroke

Re: trying to dial this tune in. could some one check it over please

Unread post by jcbryant »

I was looking over the switches for auto but I thought I saw it was not recommended in the description. obviously read wrong. Ill look to see what you did. Thanks again.
decipha
Posts: 2909
Joined: 2021 Feb 15, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: trying to dial this tune in. could some one check it over please

Unread post by decipha »

yeah it wasnt back in the day i probably need to update the comments
Post Reply