Page 2 of 2
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Mar 15, 09:02
by smith772
Got it, thanks.
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Mar 25, 23:04
by smith772
Looking at the pcm pinouts for the 2000 Explorer and 04 Grand Maquis. The Marquis has 8 pins for the coil on plug and the Explorer has 4 pins for the ignition coils packs. How do I handle this using the Marquis PCM and the Explorer hanrness. Can the pcm be programmed to use the explorer coil packs or do I have to rewire and use the Marquis coil on plug?
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Mar 26, 09:21
by decipha
you can use either or no problem
also the pin outs are on the homepage under reference
the ect is the eadt same thing too pin doesnt move
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Nov 12, 11:02
by smith772
I noticed on Montes website that the quarter horse is discontinued and out of stock. What are you using to tune now, what do I need to purchase to get you to tune my ecu?
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Nov 20, 09:11
by Neald
I've noticed this too recently. Wondering if anyone will take the torch and continue making a device to tune the Ford eec iv..
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Nov 22, 10:35
by decipha
yeah moates is
just a temporary chip shortage nothing to worry about
only option is to find a used one for now
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2022 Nov 22, 17:30
by Neald
Thanks for the response Decipha. Appreciate it. That is more than Moates has said at the moment.
Re: 1969 Ford Bronco with Explorer EFI & EDIS conversion
Posted: 2023 Feb 24, 08:57
by ATPCR
Question for smith772. Did you use the Explorer waste spark coils or convert to coil-near-plug?