Fuel Pump pin 40/80 on return non modulated roller

Used only on the 03/04 Marauder but can be used on any 03/04 ecu with code changes. Uses newer style SCP array so will not control cluster correctly on 2004 and older fords that use the older style SCP array such as mustangs.
ConWasabi
Posts: 14
Joined: 2021 Feb 15, 16:42
Location: Vista, CA
Vehicle Information: 69 Bronco w/ 89 Fox 5.0 HO, Explorer: Front Dress, gt40 heads, intake, distributorless ignition w/coil packs, 03 Vic MPC-185 & 01 f150 HD harness, [Quarterhorse, RZASA]

Fuel Pump pin 40/80 on return non modulated roller

Unread post by ConWasabi »

Sorry if its obvious or I missed it in a write up.
just for clarification is pin 40 for the relay trigger and 80 for the monitor or reverse?
only 20 more wires to go LOL....
decipha
Posts: 4950
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Fuel Pump pin 40/80 on return non modulated roller

Unread post by decipha »

80 is relay
40 monitor

the pinout is on the homepage
ConWasabi
Posts: 14
Joined: 2021 Feb 15, 16:42
Location: Vista, CA
Vehicle Information: 69 Bronco w/ 89 Fox 5.0 HO, Explorer: Front Dress, gt40 heads, intake, distributorless ignition w/coil packs, 03 Vic MPC-185 & 01 f150 HD harness, [Quarterhorse, RZASA]

Re: Fuel Pump pin 40/80 on return non modulated roller

Unread post by ConWasabi »

Thank you. The ECU Pinouts on the homepage for RZASA "RP Rly ON/Off" threw me off.
Post Reply