Re: Cooke, Brian (68 Bronco)
Posted: 2022 Feb 24, 23:25
Your right its not there just info on how to read the chip. Interesting as no one has ever pointed it out before. I know this is an inconvenience for you but will be very helpful for others that follow.
In any case in the getting started write up I have a photo showing how to read with the jaybird. Writing the chip is similar as you use the same addressing. But you have to erase the chip first.
1> plug the f3 chip on to the jaybird
2> plug the usb cable for the jaybird in to the laptop
3> click the PLUG icon in tunerpro and it will identify the hardware at the bottom left
4> Click up top in tunerpro on TOOLS >> Hardware Utilities >> Moates PROM I/O
5> At the top right under "supported chips" select J3 Ford Adapter
Set the addresses as outlined for a bank 1... its the same values as in the photo.
http://www.efidynotuning.com/pics/tprt/56k.png
Click on ERASE CHIP, once its done erasing
Click on LOAD FILE TO BUFFER, browse to the folder you have your tune file saved in and select the tune file you want to write to the chip
Then click PROGRAM CHIP. It will write the file and tell you if it succeeded or failed. The fox ecu is 57,344 bytes. It will say it wrote 57,344 bytes if you put the addesses in correctly.
Call me if you run in to any trouble.
http://www.efidynotuning.com/started.htm#jaybird
In any case in the getting started write up I have a photo showing how to read with the jaybird. Writing the chip is similar as you use the same addressing. But you have to erase the chip first.
1> plug the f3 chip on to the jaybird
2> plug the usb cable for the jaybird in to the laptop
3> click the PLUG icon in tunerpro and it will identify the hardware at the bottom left
4> Click up top in tunerpro on TOOLS >> Hardware Utilities >> Moates PROM I/O
5> At the top right under "supported chips" select J3 Ford Adapter
Set the addresses as outlined for a bank 1... its the same values as in the photo.
http://www.efidynotuning.com/pics/tprt/56k.png
Click on ERASE CHIP, once its done erasing
Click on LOAD FILE TO BUFFER, browse to the folder you have your tune file saved in and select the tune file you want to write to the chip
Then click PROGRAM CHIP. It will write the file and tell you if it succeeded or failed. The fox ecu is 57,344 bytes. It will say it wrote 57,344 bytes if you put the addesses in correctly.
Call me if you run in to any trouble.
http://www.efidynotuning.com/started.htm#jaybird