EEC-IV Data Output Link (DOL) - Tripminder
Posted: 2022 Jan 21, 19:46
Background: I making the interior of my truck stock, originally came with Premium Sound, amp is still installed original stereo long gone.
So I purchased Premium Sound CD player off ebay,, from a 1997 Contour or Mystique, same looking stereo, but unfortunately there is no clock on this stereo.
Ok, long story short, I need a clock, so I find Tripminder from the 1989-91? Super Coupes(thunderbird). These cars EEC-IV have Pin#34 puts out Data output Link(DOL) the DOL_COUNT for the Tripminder.
My EEC-IV has both Data Communications Link(DCL) and DOL enabled in the calibration, LINK_SW = 07H.
Question are:
1- The DOL_PULSE_CALC_COM3 code exists in my strategy, how is the DOL_COUNT output on pin #34?
2- Is this automatically output on pin #34 or do I have to enable it somehow?
Going to wire up the pin tonight, which may answer my question 2.
So I purchased Premium Sound CD player off ebay,, from a 1997 Contour or Mystique, same looking stereo, but unfortunately there is no clock on this stereo.
Ok, long story short, I need a clock, so I find Tripminder from the 1989-91? Super Coupes(thunderbird). These cars EEC-IV have Pin#34 puts out Data output Link(DOL) the DOL_COUNT for the Tripminder.
My EEC-IV has both Data Communications Link(DCL) and DOL enabled in the calibration, LINK_SW = 07H.
Question are:
1- The DOL_PULSE_CALC_COM3 code exists in my strategy, how is the DOL_COUNT output on pin #34?
2- Is this automatically output on pin #34 or do I have to enable it somehow?
Going to wire up the pin tonight, which may answer my question 2.