Idle Source values?

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
UGOTBIT
Posts: 1
Joined: 2021 Sep 26, 09:54
Location: Saratoga Springs, NY
Vehicle Information: 2003 Cobra FBGI0CA (HSFO)/BE-QH/J2534
2.9 Whipple/Return fuel/ID1050/Comp 106360's

Idle Source values?

Unread post by UGOTBIT »

Hey guys, new here, not exactly sure of this is the correct place to post this?

Anyway, working on my 03 Cobra and logging Idle Source. I cannot find any values listed anywhere for what the idle sources are.

Currently using BE, but couldn't find anything in my SCT stuff either.

Any help would be awesome!

Thanks!
sailorbob
Posts: 21
Joined: 2021 Feb 15, 15:09
Location: UK
Vehicle Information: MR2 turbo / Lotus

Re: Idle Source values?

Unread post by sailorbob »

Here are some values:

1 = Base idle rpm
2 = A/C rpm
3 = PAS rpm
4 = HEDF rpm
5 = Battery voltage rpm
6 = Extended idle rpm
7 = Transmission oil temperature rpm
8 = Heated windscreen rpm
9 = Transmission spin loss clip
10 = GPAS clip limited
20 = HICAM (FN825B (ACT))
21 = HICAM (FN825A (ECT))
22 = HICAM (FN826A (ECT at start))
23 = HICAM (FN826B (ACT at start))
24 = HICAM Buzz rpm
25 = Catch any hicam stack-up
30 = On Demand diagnostic test
31 = Fail safe cooling
99 = None of the above
Post Reply