Help, brain fart at work

Vehicle specific forum for tuning the Foxbody Chassis Mustangs utilizing decipha's GUFX Strategy

Help, brain fart at work

Unread postby Juice » Sat Jun 27, 2020 10:05 am

So I need to do a bit of work on my 91. I used TunerPro with Tweecer in the past without issues.....But that was years ago.

My issue is with TunerPro displaying wrong data when I open my last tune, or stock bin. (fresh install on new laptop) Even on my old laptop, which was used in the tuning process is doing the same exact thing. If I open the files with CalEdit, it is as it should be, so it is not the tune file.

I open TunerPro, select XDF definition, and open tune file. What am I missing? It is like I have the wrong xdf. I tried the one I had, I downloaded a fresh copy. No difference.

I am selling my 91, and having idle surge is not a good thing when showing the car. lol I also have an issue with high idle after driving for about 20 min. Need to fix those issues, and I really need TunerPro working.

Shameless plug:91 GT-is now a 93 cobra clone with Cervini rear bumper and wing, 2.5" cowl hood. GT40 Crate, Strim, 3550 5spd. Dynod @420 RWHP. For sale.
Juice
General Poster
 
Posts: 5
Joined: Tue Oct 16, 2018 6:14 am
Name: Julius
Vehicle Information: 2007 Mustang base w/2013 junkyard 5.0, Magnum XL, 3.73, SCT x4, Crate_6, 404rwhp.

Re: Help, brain fart at work

Unread postby decipha » Sat Jun 27, 2020 11:55 am

tunerpro doesnt work with a tweecer

post your tune file
User avatar
decipha
Tooner
 
Posts: 19474
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Decipha Ponto
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa

Re: Help, brain fart at work

Unread postby Juice » Sat Jun 27, 2020 12:05 pm

I am not trying to make the tweecer work with tunerpro. I only want to create my .bin in tunerpro. Flash it to the tweecerRT with caledit, and log with calcon. That is what I did years ago. Now I'm having all kind of issues. Tune needs to be .bin so I can use Flash&burn and put the final tune onto a Moates chip. I need the tweecer for another project.

Here is my tune file.

I also discovered I cannot get calcon to log. Got the green light, tweecer took the datalog payload, car starts and runs great (aside for the idle issues). Calcon says: you must create a payload, I did that. But that is another issue for me to fight with.

Example: I open the posted file in tunerpro, have A9P.xdf selected. My maf transfer is totally whacked. 16V and 20763.71Kg/hr in all cells. All values in this tune are correct when opened in Caledit, and loaded to tweecer without issues.
You do not have the required permissions to view the files attached to this post.
Juice
General Poster
 
Posts: 5
Joined: Tue Oct 16, 2018 6:14 am
Name: Julius
Vehicle Information: 2007 Mustang base w/2013 junkyard 5.0, Magnum XL, 3.73, SCT x4, Crate_6, 404rwhp.

Re: Help, brain fart at work

Unread postby decipha » Sat Jun 27, 2020 1:28 pm

GUF1 strategy. I went and found one on tunerpro.net

I set it for 56k

here you go.

Its dereks "sailorbobs" from more than 12 years ago dated 4-12-2008.

-enjoy
You do not have the required permissions to view the files attached to this post.
User avatar
decipha
Tooner
 
Posts: 19474
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Decipha Ponto
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa

Re: Help, brain fart at work

Unread postby Juice » Sat Jun 27, 2020 1:42 pm

Thanks for trying, but still not correct. I don't have MAF under functions (first thing I check when opening a .bin file), and clearly CID and injector slopes are not correct. See attached, all are 255.
You do not have the required permissions to view the files attached to this post.
Juice
General Poster
 
Posts: 5
Joined: Tue Oct 16, 2018 6:14 am
Name: Julius
Vehicle Information: 2007 Mustang base w/2013 junkyard 5.0, Magnum XL, 3.73, SCT x4, Crate_6, 404rwhp.

Re: Help, brain fart at work

Unread postby decipha » Sat Jun 27, 2020 3:12 pm

Thats cuz your version of tunerpro is severely outdated. Download the latest tunerpro version and you will be fine.

http://tunerpro.net/downloadApp.htm
User avatar
decipha
Tooner
 
Posts: 19474
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Decipha Ponto
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer
06 Chrysler 300 AWD - Sharifa


Return to Foxbody Tuning (GUFX)

Who is online

Users browsing this forum: No registered users and 0 guests

cron