2006 Mustang & 1993 MarkVIII engine and transmission

Place for your vehicle notes and blow-by-blow build threads.
Apex
Posts: 3
Joined: 26 Jul 2021, 13:52
Location: Denver, CO
Vehicle Information: 1998 Ford Escort ZX2
1996 Ford Mustang
2007 Ford F-150

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Apex »

I would start by going through the circuit and figure out what you're missing, do you have power at relay pin 30 at all times and power at relay pin 85 (in park/neutral and key in crank position)? Does the relay coil energize when you turn the key (power at pin 85) and power at 87 if so? Is your engine block grounded well to the chassis? Etc. etc.
decipha
Posts: 1768
Joined: 15 Feb 2021, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by decipha »

how did you wire up the mlps?

thats pin 2 on your old ecu harness

if need be just rewire the starter trigger wire to the ignition switch
Pguercio1
Posts: 21
Joined: 22 Aug 2021, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

Ok Michael
I’ll go through it all again
I’ll let you know
Thanks for your help!!!
I really do appreciate it!
Post Reply