1990 Fox 306, Deka 60's @ 55psi, Pro M maf, Vortech S trim.
Just wondering what I can do about the WOT fueling being a little all over the place, would it help to lower the Imaf points and give it more resolution in 25-50 imaf increments up top since I'm not using the upper half of the MAF much past 700imaf
Log and .bin attached
WOT Fuel Inconsistency
-
Brewster
- Posts: 92
- Joined: 2021 May 15, 15:59
- Location: Edmonton, Alberta, Canada
- Vehicle Information: 1992 Mustang LX
347 Cui
AFR 185
WOT Fuel Inconsistency
- Attachments
-
- WOT-3rd-belt-3.xdl
- (15.7 KiB) Downloaded 203 times
-
- Deka60-55psi-belt-v2.bin
- (56 KiB) Downloaded 196 times
-
red5.0fogger
- Posts: 150
- Joined: 2021 Mar 22, 15:58
- Location: Newington CT
- Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s
Re: WOT Fuel Inconsistency
recently my wot fuel was erratic and I replaced the pump and now it's back to normal. How old is the pump?
-
Brewster
- Posts: 92
- Joined: 2021 May 15, 15:59
- Location: Edmonton, Alberta, Canada
- Vehicle Information: 1992 Mustang LX
347 Cui
AFR 185
Re: WOT Fuel Inconsistency
I don't think its very old TBH. Seems to maintain good fuel pressure to on WOT, I'll confirm again with a pull as its strapped down atm.
-
Brewster
- Posts: 92
- Joined: 2021 May 15, 15:59
- Location: Edmonton, Alberta, Canada
- Vehicle Information: 1992 Mustang LX
347 Cui
AFR 185
Re: WOT Fuel Inconsistency
Yea its maintaining fuel pressure at wot.