HEGO Bias (FN1353)

A1C calibration can be modified and configured to operate all EFI-SD4x ECUs in 4 cylinder, 6 cylinder and 8 cylinder configurations.
efloth
Posts: 300
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

HEGO Bias (FN1353)

Unread post by efloth »

Just curious if HEGO Bias (FN1353) is not present in A1C or is it just not broken out in the XDF? TIA
efloth
Posts: 300
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: HEGO Bias (FN1353)

Unread post by efloth »

I believe this is it and to my surprise it is already zero. I can see why you didn't bother adding it in.

Table_a92e:
a92e: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a934: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a93a: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a940: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a946: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a94c: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a952: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
a958: 00,00,00,00,00,00 table 0, 0, 0, 0, 0, 0
Post Reply