Recording the box tune

Vehicle specific forum for tuning the Foxbody Chassis Mustangs utilizing decipha's GUFX Strategy

Recording the box tune

Unread postby JBasham » Sat Jan 05, 2019 6:27 pm

I'm pretty sure the answer is "no" for the EEC-IV box, but just verifying.

I have a QuarterHorse installed and I use TunerPro RT.

There's no way to pull a copy of Henry's tune from the AL9 box and run it, right? I need to get off my butt and remove the QuarterHorse from the box to get back to that?

I'm not having problems with my tune. I'm selling the motor and I want to demo it to buyers with the stock firmware tune, since they won't be able to run my tune once they install their own wiring harness and EEC-IV box.

Thanks, and Happy New Year!
JBasham
General Poster
 
Posts: 16
Joined: Sun May 20, 2018 7:58 am
Vehicle Information: 1991 Ford Mustang 5.0 motor; A3M1 ECU GUFB A9L2; Quarterhorse and TunerProRT

Re: Recording the box tune

Unread postby decipha » Sat Jan 05, 2019 7:24 pm

yep sure can just read it out and write it to the qh details are in the getting started write up

or u can just remove the qh
User avatar
decipha
Tooner
 
Posts: 16216
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer

Re: Recording the box tune

Unread postby JBasham » Sat Jan 19, 2019 1:36 pm

Thanks. I should read to the end.

I followed the directions, but no dice.

When I read the chip, it fails and I hear a soft clunk under the hood.

Here's a screen shot.

https://drive.google.com/file/d/1_c3W25sWb-ICMCMdaTshB0CQVTnYtmit/view?usp=sharing

thanks.
JBasham
General Poster
 
Posts: 16
Joined: Sun May 20, 2018 7:58 am
Vehicle Information: 1991 Ford Mustang 5.0 motor; A3M1 ECU GUFB A9L2; Quarterhorse and TunerProRT

Re: Recording the box tune

Unread postby motorhead1991 » Sat Jan 19, 2019 11:40 pm

Turn the key on, read the chip.

This usually works for me.
motorhead1991
 
Posts: 199
Joined: Mon Apr 03, 2017 6:46 pm
Name: Anthony Cox
Vehicle Information: 1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.
Vehicle 2 Information: Stock 1990 Ranger. ICM relocation


Return to Foxbody Tuning (GUFX)

Who is online

Users browsing this forum: No registered users and 0 guests