help finding strategy for S0M box code.

non vehicle specific forum for tuning all other EEC-IV

help finding strategy for S0M box code.

Unread postby maik21 » Tue Nov 27, 2018 8:35 pm

i was searching without lucky trying to find strategy for box code s0m.

thankyou very much.
You do not have the required permissions to view the files attached to this post.
maik21
General Poster
 
Posts: 22
Joined: Thu Aug 04, 2016 1:07 am
Name: maik
Vehicle Information: mustang 2003, 4.6, 2v,roush stg 1, xsh1/RYAF1, tunerpro rt5, moates quarterhorse, no catalitic converters.

Re: help finding strategy for S0M box code.

Unread postby Landho » Tue Nov 27, 2018 9:49 pm

Following - I have two of those from some Bronco’s I harvested parts out of ... Speed Density for 351w... couldn’t find what I needed either to use them for tuning. Ended up with a D9S, then MAF w/ A9L, and now t4m0
Landho
Premium Member
 
Posts: 193
Joined: Sat Feb 18, 2017 10:32 pm
Name: Rich Bailey
Vehicle Information: 1969 Ford Bronco, poor man's frame-off restomod.
Dart 347 stroker, forged, zero balanced w/ Dart Iron Eagle heads, b303 cam, scorpion 1.6 roller rockers, A9L EEC, Shorty headers (for early bronco),2.5" pipes y-pipe into magnaflow, 30# injectors, Explorer gt40-ish style intake w/ 1" plenum spacer (to clear tall valve covers), PMAS HPX w/ 3" blow through tube. no smog. Innovative MTX-L2 wb o2, Tweecer RT, Binary Editor
Vehicle 2 Information: Part Bronco... '72
Vehicle 3 Information: Tuned lifted 2013 Expedition driver.... tuned, cold air, cat-back
Additional Vehicles: 2017 Jeep Rubicon, 4.5" lift, 35" tires - boring!

Re: help finding strategy for S0M box code.

Unread postby decipha » Tue Nov 27, 2018 9:53 pm

efi-sd3xx is the hardware code

if its a v8 u can try loading a efi-sd4x cal on it off the homepage

whats it out of ?

in any case, any strategy for that is going to be catch code specific. There is none that i know of for that ecu and will most likely never be any made for it.
User avatar
decipha
Tooner
 
Posts: 15787
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: help finding strategy for S0M box code.

Unread postby Landho » Tue Nov 27, 2018 10:24 pm

I pulled mine from mid 90’s Bronco’s with 351w and auto trans ... think they came in some e & f250 4x4’s as well
Landho
Premium Member
 
Posts: 193
Joined: Sat Feb 18, 2017 10:32 pm
Name: Rich Bailey
Vehicle Information: 1969 Ford Bronco, poor man's frame-off restomod.
Dart 347 stroker, forged, zero balanced w/ Dart Iron Eagle heads, b303 cam, scorpion 1.6 roller rockers, A9L EEC, Shorty headers (for early bronco),2.5" pipes y-pipe into magnaflow, 30# injectors, Explorer gt40-ish style intake w/ 1" plenum spacer (to clear tall valve covers), PMAS HPX w/ 3" blow through tube. no smog. Innovative MTX-L2 wb o2, Tweecer RT, Binary Editor
Vehicle 2 Information: Part Bronco... '72
Vehicle 3 Information: Tuned lifted 2013 Expedition driver.... tuned, cold air, cat-back
Additional Vehicles: 2017 Jeep Rubicon, 4.5" lift, 35" tires - boring!

Re: help finding strategy for S0M box code.

Unread postby motorhead1991 » Tue Nov 27, 2018 10:40 pm

Pull a copy of the binary, I'd be happy to add it to the pile of tunes I'm already tinkering with.
motorhead1991
Power Poster
 
Posts: 149
Joined: Mon Apr 03, 2017 6:46 pm
Name: Anthony Cox
Vehicle Information: 1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.
Vehicle 2 Information: Stock 1990 Ranger. ICM relocation

Re: help finding strategy for S0M box code.

Unread postby maik21 » Wed Nov 28, 2018 1:45 am

i didnt have the car right now but i can borrow it in a few days to download binary.

its a bronco with 351w. they put a camshaft and now there is black smoke out from exhaust and low mpg. its an auto trans too.
maik21
General Poster
 
Posts: 22
Joined: Thu Aug 04, 2016 1:07 am
Name: maik
Vehicle Information: mustang 2003, 4.6, 2v,roush stg 1, xsh1/RYAF1, tunerpro rt5, moates quarterhorse, no catalitic converters.

Re: help finding strategy for S0M box code.

Unread postby maik21 » Wed Nov 28, 2018 1:48 am

decipha wrote:efi-sd3xx is the hardware code

if its a v8 u can try loading a efi-sd4x cal on it off the homepage

whats it out of ?

in any case, any strategy for that is going to be catch code specific. There is none that i know of for that ecu and will most likely never be any made for it.


i will take a look. thankyou.
maik21
General Poster
 
Posts: 22
Joined: Thu Aug 04, 2016 1:07 am
Name: maik
Vehicle Information: mustang 2003, 4.6, 2v,roush stg 1, xsh1/RYAF1, tunerpro rt5, moates quarterhorse, no catalitic converters.

Re: help finding strategy for S0M box code.

Unread postby maik21 » Fri Nov 30, 2018 9:52 pm

S0M BIN
You do not have the required permissions to view the files attached to this post.
maik21
General Poster
 
Posts: 22
Joined: Thu Aug 04, 2016 1:07 am
Name: maik
Vehicle Information: mustang 2003, 4.6, 2v,roush stg 1, xsh1/RYAF1, tunerpro rt5, moates quarterhorse, no catalitic converters.

Re: help finding strategy for S0M box code.

Unread postby maik21 » Fri Nov 30, 2018 11:19 pm

wich could i use to test from SD4:
- C3P2.BIN
- C3P3.BIN
- ICY1.BIN

I see this engine hasnt MAF sensor or maybe i dont see it.
maik21
General Poster
 
Posts: 22
Joined: Thu Aug 04, 2016 1:07 am
Name: maik
Vehicle Information: mustang 2003, 4.6, 2v,roush stg 1, xsh1/RYAF1, tunerpro rt5, moates quarterhorse, no catalitic converters.

Re: help finding strategy for S0M box code.

Unread postby motorhead1991 » Sat Dec 01, 2018 12:03 am

This binary is similar to EFI-SD2xx, so this should be fun
motorhead1991
Power Poster
 
Posts: 149
Joined: Mon Apr 03, 2017 6:46 pm
Name: Anthony Cox
Vehicle Information: 1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.
Vehicle 2 Information: Stock 1990 Ranger. ICM relocation


Return to EEC-IV Tuning

Who is online

Users browsing this forum: No registered users and 0 guests

cron