Low load knock

non vehicle specific forum for tuning all other EEC-IV

Low load knock

Unread postby Toddskill » Fri Nov 09, 2018 11:31 pm

I am trying to get rid of a low load knock, I have read through the timing write up but am confused on which table to adjust. I am running RHS heads which show 22 & 39 as the recommendation but my AHACB def has a lot of spark tables and I'm getting confused.
Toddskill
General Poster
 
Posts: 3
Joined: Fri Nov 09, 2018 8:06 pm
Name: Todd
Vehicle Information: 1990 F-150 4x4 E4OD. 94 mass air ecu HOG0. Quarterhorse with binary editor.

Re: Low load knock

Unread postby decipha » Fri Nov 09, 2018 11:50 pm

thats no surprise RHS heads are the most efficient fast burn heads ever made for a sbf, they don't like much timing at all

first you need to simplify your spark so your only running on the borderline knock table

then go to the cell where you have knock and reduce it
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: Low load knock

Unread postby Toddskill » Sat Nov 10, 2018 12:01 am

So I just need to set fn2100 & fn2110 all way high and adjust in the boardeline table? And do I permanently leave those two disabled or just while everything is getting dialed in?
Thanks
Toddskill
General Poster
 
Posts: 3
Joined: Fri Nov 09, 2018 8:06 pm
Name: Todd
Vehicle Information: 1990 F-150 4x4 E4OD. 94 mass air ecu HOG0. Quarterhorse with binary editor.

Re: Low load knock

Unread postby decipha » Sat Nov 10, 2018 12:05 am

details are in the spark write up

I can 1 up that though, if you go to the homepage under downloads you'll see ahac2 (same as ahacb). You can download the base auto stock tune and see exactly how to configure it by comparing your tune to it
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: Low load knock

Unread postby Toddskill » Sat Nov 10, 2018 12:08 am

Thanks, didnt realize they were the same.
Toddskill
General Poster
 
Posts: 3
Joined: Fri Nov 09, 2018 8:06 pm
Name: Todd
Vehicle Information: 1990 F-150 4x4 E4OD. 94 mass air ecu HOG0. Quarterhorse with binary editor.


Return to EEC-IV Tuning

Who is online

Users browsing this forum: No registered users and 1 guest