#mass/tic values

Non-vehicle specific forum for tuning all ford ecu's 1994-2004, including the 1994-1995 Mustang, 93-98 Mark VIII, 99+ F-150, 99-04 Mustang, 03-04 Cobra, 99-03 Harley Davidson and Lightning F-150

FBFG2, CBAZA, CZAJL, and all EEC-V

#mass/tic values

Unread postby itsacrazyasian » Wed Nov 07, 2018 9:59 pm

Evening guys!

Been looking around and reading for the last few days. Just recently acquired SCT advantage 3 to tune my Ford powered Volvo wagon. Drivetrain is from a 98 explorer. Catchcode NRT1. Very new to the sct software.

I converted the car to a blowthru maf using a Ford OEM slot sensor 3l3a-12b579-ba in a 3in tube. The car runs great using the stock tonsil maf but the car got a turbo. I can't for the life of me understand or find a table that shows the values needed under #mass/tic

So in SCT i can adjust the counts and mass/tic to calculate flow.

I have a SCT ba5000 sensor and spreadsheet to generate voltage/count and flow. But the table does not account for the mass/tic (processor speed?)

Appreciate the help guys!
itsacrazyasian
User
 
Posts: 1
Joined: Wed Nov 07, 2018 9:33 pm
Name: Patrick
Vehicle Information: 1998 Explorer 5.0/4r70w in a volvo wagon

Re: #mass/tic values

Unread postby decipha » Wed Nov 07, 2018 11:06 pm

I'll shoot u a PM, shoot me back the tune file and i'll take a look
User avatar
decipha
Tooner
 
Posts: 15709
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce


Return to EEC-V & SN95 Tuning

Who is online

Users browsing this forum: jsa and 2 guests