You can use an explorer timing cover with explorer balancer. If youre 28oz instead of 50, youll need to get a custom balancer made. These guys make them https://www.damperdudes.net/harmonic-ba ... 024ex28oz/91GTman wrote: ↑2021 Nov 06, 23:42 Also needing to figure out how to mount the crank sensor. I have the stock sensor from a 04 marquis. I have an aftermarket pioneer balancer that is balanced with the motor so I don’t want to swap for the explorer timing cover set up. I have a 36-1 wheel I can’t mount behind the crank pulley. Guess I’ll have to fab a bracket and use some shims for gapping the sensor.
Anyone using RSAZA on a pushrod 302?
-
dleach1407
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Anyone using RSAZA on a pushrod 302?
-
dleach1407
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Anyone using RSAZA on a pushrod 302?
Im using a 4r70W, not a manual trans. Do you have a base tune with the 4r as well by chance?decipha wrote: ↑2021 Nov 15, 06:56 I've done quite a few of them. There's currently a premium member that has a sbf gt40 302 in a ranger with one as well.
LMK when any of yall are ready and I'll post an updated xdf with my new ect code and a base sbf manual trans tune as well to make life significantly easier.
-
Tracn20
- Posts: 3
- Joined: 2021 Nov 21, 18:51
- Location: Boise Idaho
- Vehicle Information: 2001 Explorer Sport Trac
Re: Anyone using RSAZA on a pushrod 302?
I would be down as well. I have a 2001 sport Trac That I want to stick a pushrod 5.0 in and have a whole 2001 explorer eddie bauer as a donor. m50dr2 5 speed and a 4406 transfer.
Currently, the trac is a 4.0 with a auto... Need to find trstrat and trload to knock off the automatic and run it as a stick since I have a grip of codes on the 5r55e.
Currently, the trac is a 4.0 with a auto... Need to find trstrat and trload to knock off the automatic and run it as a stick since I have a grip of codes on the 5r55e.
-
decipha
- Posts: 5046
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Anyone using RSAZA on a pushrod 302?
I love those sport trac's and always wanted to do the same and 5.0 swap one as well since I have a 2000 explorer thats a backup to my gmc 2500 which is a backup to my harley which is a backup to my daily f150 to pull my trailer lol.
yeah rzasa is the only way to go for any ecu swap with edis especially so on the pushrods as it works excellent
yeah rzasa is the only way to go for any ecu swap with edis especially so on the pushrods as it works excellent
-
RinerAuto
- Posts: 100
- Joined: 2021 Apr 14, 15:30
- Location: Portsmouth, Virginia
- Vehicle Information: 1994 Mustang
302W w/RZASA and CNP
YouTube: RinerAutomotive
Instagram: RinerAutomotive
Re: Anyone using RSAZA on a pushrod 302?
FYI I started a build thread on here for my conversion in a SN95 Mustang.
viewtopic.php?t=429
viewtopic.php?t=429