Extended VE Automation Excel File

A1C calibration can be modified and configured to operate all EFI-SD4x ECUs in 4 cylinder, 6 cylinder and 8 cylinder configurations.
Post Reply
efloth
Posts: 300
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Extended VE Automation Excel File

Unread post by efloth »

Currently set up for 500-4k RPM. You can adjust as necessary but make sure the formulas on "New VE" Sheet line up appropriately.
Attachments
Extended VE Automation 06162021.zip
(19.72 KiB) Downloaded 519 times
Top
efloth
Posts: 300
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: Extended VE Automation Excel File

Unread post by efloth »

Added correction factor variable to allow for smaller corrections and prevent overcorrecting. Set to 100% to disable.
Attachments
Extended VE Automation 08042021.zip
(19.8 KiB) Downloaded 520 times
Top
efloth
Posts: 300
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: Extended VE Automation Excel File

Unread post by efloth »

Updated with more histogram columns. Updated formulas that lookup RPM and load instead of requiring manual config. Way easier to setup for your specific rpm/load range.
Attachments
Extended VE Automation 10022023.xlsx
(27.23 KiB) Downloaded 346 times
Top
Post Reply

Return to “A1C - 80/90s EFI-SD4x Speed Density”