TunerPro idle payloads

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
Dave67
Posts: 23
Joined: 2021 Jun 07, 16:17
Location: Texas
Vehicle Information: 2003 Ford Mustang GT, XSH1 Ecu, TVS 1900 supercharger, typical mods.

TunerPro idle payloads

Unread post by Dave67 »

A few questions:

1. Is DESMAF_PID_N the same as IPSIBR? I don’t see IPSIBR as an option.

2. I there a way to log ISC KAM?

3. My SPK_DSDRPM payload is inaccurate. It is at like 3000 something rpm when at warm stable idle. Car idles just fine at 725 or wherever I set it to. No big deal, but any ideas why the inaccuracy?

Thanks
decipha
Posts: 2909
Joined: 2021 Feb 15, 12:23
Location: New Orleans, LA
Vehicle Information: 10x Supercoupes
Lincoln LS 5spd
Ls1 t56 ss camaro
Whippled Harley Truck
gmc 2500hd classic
gt40p explorer
Marauder
Chrysler 300 AWD hemi
3.5 Explorer

Re: TunerPro idle payloads

Unread post by decipha »

Yes except DESMAF_PID_N includes the ISCKAM correction value as well so it gives you the total correction not just instantaneous.

yep you can log it but no need in logging isc kam for reason stated

Its wrong cuz you are using an oudated adx. Download the latest fbgi0 adx from the downloads page and if its still not reading correctly let me know and I'll post an updated adx.
Dave67
Posts: 23
Joined: 2021 Jun 07, 16:17
Location: Texas
Vehicle Information: 2003 Ford Mustang GT, XSH1 Ecu, TVS 1900 supercharger, typical mods.

Re: TunerPro idle payloads

Unread post by Dave67 »

Perfect. Thanks

The adx on the downloads page is the same as mine. DECIPHA_210419
Post Reply