ECU that supports both a distributor and PWM fuel control

Covers all sn94/95 mustang v8 ecu's.
dleach1407
Posts: 468
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

ECU that supports both a distributor and PWM fuel control

Unread post by dleach1407 »

Is there an ecu out there that can operate the TFI distributor ignition system in the 94/95 mustang and has PWM fuel control? pretty sure the answer is no but I thought I would check.
decipha
Posts: 5033
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: ECU that supports both a distributor and PWM fuel control

Unread post by decipha »

correct

that would be a negative ghost rider

you can always run two ecus though
Post Reply