RZASA adx?
-
dleach1407
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: RZASA adx?
I was planning on running returnless using the pwm feature cause i thought it would simplify things (no regulator, less tubing/hoses) Should i just abandon that and use a regulator in the back with vacuum/ boost reference like i did on my mustang? I want to avoid circulating a bunch of unused fuel through the engine compartment since i have had boiling issues in the past and i live at high altitude. I do plan on using dual pumps eventually since it will be twin turbo (eventually)
-
decipha
- Posts: 5033
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: RZASA adx?
nah by all means use the returnless
if u dont have published data for your injectors just null all but the high slope multiplier and dial it in
if u dont have published data for your injectors just null all but the high slope multiplier and dial it in
-
dleach1407
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: RZASA adx?
I don't see any info regarding dialing that in. I looked at the fueling write up and didn't see anything about it. It might be easier to just run a regulator in the back and zero out all the delta p settings.
-
decipha
- Posts: 5033
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: RZASA adx?
if u 0 the deltap youll hang the injectors wide open you mean 1 out the functions
I just described how to do it above.
null all but the high slope multiplier and dial it in
its thats simple takes all of 5 minutes to test
I just described how to do it above.
null all but the high slope multiplier and dial it in
its thats simple takes all of 5 minutes to test