Mustang Foxbody 1986? - 1993 5.0 2.3 Throttle Bracket
Posted: 2026 Aug 04, 12:37
It's still over 100* outside so i haven't been well enough to figure out the mustang's intake yet, so here's another thing i felt could use a remodel.
www.printables.com/model/1800023-mustan ... le-bracket
since the manifold's not tested, neither is this, but it's aligned and doesnt bend when pulling the cable past the stop. I think this is as compact as i can reasonably make it.
Is there anything else that we could use being remade in plastic? I have a my own 93 SVOish and 95 f150 to work with. Otherwise, I'll need the part on hand or very nice measurements to remodel properly.
www.printables.com/model/1800023-mustan ... le-bracket
since the manifold's not tested, neither is this, but it's aligned and doesnt bend when pulling the cable past the stop. I think this is as compact as i can reasonably make it.
Is there anything else that we could use being remade in plastic? I have a my own 93 SVOish and 95 f150 to work with. Otherwise, I'll need the part on hand or very nice measurements to remodel properly.