1993 ranger 4.0 XDF

For all other non specifically listed ECU tuning. This would include can-bus ecu's such as powerpc copperhead tricore and siemens ecus. As well as GM, Dodge or any aftermarket controller tuning etc...
Post Reply
tufgriz
Posts: 22
Joined: 2022 Jan 10, 21:51
Location: Culbertson Mt
Vehicle Information: 1993 4.0 Ranger xl Currently stock RAT1
1989 mustang gt running Megasquirt HCI 302 swapped back to a9l

1993 ranger 4.0 XDF

Unread post by tufgriz »

I am trying to find a XDF and even a ADX file for a 93 ranger 4.0 with RAT1 ecu? Thanks
Top
efloth
Posts: 399
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: 1993 ranger 4.0 XDF

Unread post by efloth »

Send me your bin and I can take a look. What parameters are you trying to modify?
Top
tufgriz
Posts: 22
Joined: 2022 Jan 10, 21:51
Location: Culbertson Mt
Vehicle Information: 1993 4.0 Ranger xl Currently stock RAT1
1989 mustang gt running Megasquirt HCI 302 swapped back to a9l

Re: 1993 ranger 4.0 XDF

Unread post by tufgriz »

efloth wrote: ↑2025 Jan 13, 14:42 Send me your bin and I can take a look. What parameters are you trying to modify?
just looking for the the files right now would like to take a look and see what is adjustable and maybe tweak a little on the factory hot start
Top
efloth
Posts: 399
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: 1993 ranger 4.0 XDF

Unread post by efloth »

It would have to be created. I can help you find what you are looking for. I am not aware of any XDF or ADX for RAT1 so unless someone has something we will have to start from scratch.
Top
tufgriz
Posts: 22
Joined: 2022 Jan 10, 21:51
Location: Culbertson Mt
Vehicle Information: 1993 4.0 Ranger xl Currently stock RAT1
1989 mustang gt running Megasquirt HCI 302 swapped back to a9l

Re: 1993 ranger 4.0 XDF

Unread post by tufgriz »

Ya, I was hoping it might be floating around. I have no knowledge of creating one. I do know there is one for binary editor
Top
efloth
Posts: 399
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: 1993 ranger 4.0 XDF

Unread post by efloth »

tufgriz wrote: ↑2025 Jan 14, 12:06 Ya, I was hoping it might be floating around. I have no knowledge of creating one. I do know there is one for binary editor
I can help you create the files and add some basic stuff. Post your bin if you want.
Top
tufgriz
Posts: 22
Joined: 2022 Jan 10, 21:51
Location: Culbertson Mt
Vehicle Information: 1993 4.0 Ranger xl Currently stock RAT1
1989 mustang gt running Megasquirt HCI 302 swapped back to a9l

Re: 1993 ranger 4.0 XDF

Unread post by tufgriz »

Here is my bin file
Attachments
RAT1.bin
(56 KiB) Downloaded 189 times
Top
tufgriz
Posts: 22
Joined: 2022 Jan 10, 21:51
Location: Culbertson Mt
Vehicle Information: 1993 4.0 Ranger xl Currently stock RAT1
1989 mustang gt running Megasquirt HCI 302 swapped back to a9l

Re: 1993 ranger 4.0 XDF

Unread post by tufgriz »

Any luck?
Top
decipha
Posts: 6384
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'25 F-150 5L

Re: 1993 ranger 4.0 XDF

Unread post by decipha »

Unlikely anyone would get anything meaningful done in 5 days. Usually disassembly takes a while.

Whats wrong with the hot start exactly? what all is modified/changed on the vehicle ?
Top
tufgriz
Posts: 22
Joined: 2022 Jan 10, 21:51
Location: Culbertson Mt
Vehicle Information: 1993 4.0 Ranger xl Currently stock RAT1
1989 mustang gt running Megasquirt HCI 302 swapped back to a9l

Re: 1993 ranger 4.0 XDF

Unread post by tufgriz »

wasnt sure how long it would take to break down
Top
Post Reply

Return to “PCM / ECU / EEC Tuning”