Pro-M 9 Point to 30 Point conversion
-
bad86capri
- Posts: 167
- Joined: 2021 Feb 16, 10:09
- Location: Knoxville, TN
- Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.
Pro-M 9 Point to 30 Point conversion
I need to convert a Pro-M 9 point curve to a 30 point curve. I thought i could do it in tunerpro but there is not an interpolate function in the maf. I have EEC Analyzer and will try it this evening. Do you guys know of another way or easier way? Google has been no help.
-
rusty_lawrence
- Posts: 119
- Joined: 2021 Jun 03, 14:46
- Location: New Orleans
- Vehicle Information: 1994 F150 Lightning
WAY1 / SMD-221 / AHAC2
408w / AFR heads / Ported GT40
Novi 2000 intercooled S/C
wbo2_aem_uego
Re: Pro-M 9 Point to 30 Point conversion
Post it here and I’m sure some excel gurus can help. I’ve done similar things before
-
decipha
- Posts: 6384
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'25 F-150 5L
Re: Pro-M 9 Point to 30 Point conversion
No excel needed, its just linear
-
m0l0
- Posts: 4
- Joined: 2021 Feb 16, 01:08
- Location: Mexico
- Vehicle Information: 89 LX : 351w AFR185,Trickflow R Intake,Lunati 51014, On3 76 A9L2
97 Cobra : Stock Just Tweecer RT
Re: Pro-M 9 Point to 30 Point conversion
Found this on my old file collection, hope it can help
- Attachments
-
- Curve_fitting_and_load_calculations.xls
- (32 KiB) Downloaded 534 times
-
bad86capri
- Posts: 167
- Joined: 2021 Feb 16, 10:09
- Location: Knoxville, TN
- Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.
Re: Pro-M 9 Point to 30 Point conversion
EEC Analyzer done the trick.