EFIDynoTuning Forum

I have one of those TI chips. Man they are stupid expensive.

034V, where can you get that burner?

Nxcoupe wrote: ↑2023 Apr 17, 18:23 I have one of those TI chips. Man they are stupid expensive.

034V, where can you get that burner?

The Burn2/FE/FA was a Moates setup. I've seen some copies of it, but not sure if you can find the adapter for the J3 anymore.

The TI Performance chips, I always order their burner with them. Like $230 for both shipped from the Aussie world.

Their burner works with TunerPro RT and has a unique bank assignment feature, but will not program anything but the TI Performance chip due to the ribbon cable. In other words, it wont burn via the card edge connector.

Nxcoupe wrote: ↑2023 Apr 17, 18:23 I have one of those TI chips. Man they are stupid expensive.

I think I priced the J3 TI chip for $65 usd, last weeks dollar conversation, I’m thinking about buying a batch

wwhite wrote: ↑2023 Apr 18, 11:39

Nxcoupe wrote: ↑2023 Apr 17, 18:23 I have one of those TI chips. Man they are stupid expensive.

I think I priced the J3 TI chip for $65 usd, last weeks dollar conversation, I’m thinking about buying a batch

Good device. Just some ECU's have slight capacitor interference but it's easy to manipulate around.

Reminder.. all 56k MUST be a 256k Binary

How does one convert a 56k bin to 256k?

dleach1407 wrote: ↑2023 Apr 19, 21:52 How does one convert a 56k bin to 256k?

Padding I think, lots of padding/filler.
http://www.efidynotuning.com/dis.htm

dleach1407 wrote: ↑2023 Apr 19, 21:52 How does one convert a 56k bin to 256k?

57344 (56k) byte starting at 22000, which is bank 8 in a 256k. That is where the tuning will need to reside. Bin Size in HEX 40000..

Received my TIPerformance order today…
Came with a hat that fits, candy that I ate most of, a pen with ink, and a couple of J3 adapters that I think have connections for a switch to change tunes.
Now I just need to find some time.

Supper happy!!!

034v wrote: ↑2023 Apr 12, 18:53 TI Performance and SCT 6600 only for me.

SCT works ok with the jaybird? Any different settings? I asked this somewhere else on the forum too