Page 2 of 3

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 May 28, 08:13
by decipha
0xF234 is whats in the open source cbaza xdf

Looks like someone put it there back in 2006.

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 May 28, 11:21
by sailorbob
That address does not appear to be used anywhere in the code. It is also at the start of the transmission related parameters so I suspect if it were used then it would be for something transmission related.

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 May 28, 11:57
by DOHCTOR_32V
All I can offer at this point is that THBP2 shows up in the list of scalars, in Binary Editor and TunerPro, in every stock, CBAZA bin I have opened.

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 May 28, 12:10
by decipha
its just a place holder from the cbaza a2l

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 Jun 01, 08:44
by sailorbob
Thanks to Mike G I can confirm the scalar at 0xF234 is 'WOT Enrichment Threshold' (aka HWOTBP). It is probably an orphan left over from the strategy development.

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 Jun 01, 09:48
by decipha
yep sounds about right

i didn't know he had that doc

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 Jun 01, 12:08
by sailorbob
I do not think the information came from a strategy document as they do not give parameter size, sign, address and scaling which was provided.

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 Jun 01, 12:34
by decipha
I was referring to the a2l document which has exactly that

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 Jun 01, 13:17
by sailorbob
I have heard of Ford using a 'VRF' file for this but not an 'A2L'. I thought the latter was 3rd party produced.

Re: Purpose of THBP2 scalar VS FN513

Posted: 2022 Jun 01, 16:26
by decipha
Nope comes directly from ford. Its usually in a .ati file extension.