ZYA2 not work?

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
mechanicalmatch
Posts: 88
Joined: 2021 Apr 15, 10:56
Location: Spring Texas
Vehicle Information: 00 F150 4.6L Extended cab
CVAF1
4R70 3.08

Re: ZYA2 not work?

Unread post by mechanicalmatch »

I took the bin decipha posted, put your vin and pats key in, and converted with custom ecm 's bank swap tool. I then compared it to the one you posted. Hex editor shows no differences. Makes me think that maybe there is an issue with the tool. Try converting manually the bin manually and do a bin compare and see if the code is there. Info on the bank swapping process is in the "eec disassembly" write up.
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: ZYA2 not work?

Unread post by Red Mach1 »

Ok. Thanks much. I tried convert amz2 for cobra and no error after write...only with zya2...I will convert manually but dont understand whats mean insert 65536 look attachment
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: ZYA2 not work?

Unread post by Red Mach1 »

Ok. Thanks much. I tried convert amz2 for cobra and no error after write...only with zya2...I will convert manually but dont understand whats mean insert 65536 look attachment
Attachments
IMG_20221206_151826_925.jpg
mechanicalmatch
Posts: 88
Joined: 2021 Apr 15, 10:56
Location: Spring Texas
Vehicle Information: 00 F150 4.6L Extended cab
CVAF1
4R70 3.08

Re: ZYA2 not work?

Unread post by mechanicalmatch »

65536 bytes or 0x1000 bytes
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: ZYA2 not work?

Unread post by bad86capri »

I think the issue is the ZYA2 is corrupt. i tried loading it in my car Saturday and the fan and fuel pump ran continuously and i got the dashes in the odometer.
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: ZYA2 not work?

Unread post by Red Mach1 »

Yes not work... I tried amz cobra tune and car start with stock amz without modifications, zya2 and sym2 not work
Post Reply