I'm new to TPRT and the QH but, as I understand it, I should be able to set the QH to mode 0 and bypass it if I need to use the OBDii port?
If that is true, how do i set the mode for the QH in TunerPro? It would be so much handier than pulling the ECU every time.
Thanks,
Paul
Set QH mode in TunerPro?
-
- Posts: 32
- Joined: 2022 Dec 06, 15:24
- Location: Alberta, Canada
- Vehicle Information: 1998 Ford Mustang GT 5 speed box code BAI1, CRAI8
stock return fuel system with Walbro 255 in-tank pump and aeromotive adjustable regulator.
2008 4.6
PI Heads and Cams
9:1 forged pistons
Forged H-Beam Rods
60lb Deka injectors
BA2800 MAF
2.3L whipple supercharger intercooled approx 13 PSI
- tuning with TunerProRT
PLX Wideband
GM 3bar MAP
-
- Posts: 5085
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Set QH mode in TunerPro?
obd2 port works with tge j3 active you just cant read or write tunes
there is no way for the time being tunerpro doesnt currently support selecting alternate qh modes
there is no way for the time being tunerpro doesnt currently support selecting alternate qh modes
-
- Posts: 32
- Joined: 2022 Dec 06, 15:24
- Location: Alberta, Canada
- Vehicle Information: 1998 Ford Mustang GT 5 speed box code BAI1, CRAI8
stock return fuel system with Walbro 255 in-tank pump and aeromotive adjustable regulator.
2008 4.6
PI Heads and Cams
9:1 forged pistons
Forged H-Beam Rods
60lb Deka injectors
BA2800 MAF
2.3L whipple supercharger intercooled approx 13 PSI
- tuning with TunerProRT
PLX Wideband
GM 3bar MAP
Re: Set QH mode in TunerPro?
That explains why I couldn't find it. I was just trying to speed up reading my assorted SCT tunes into TunerPro.
Thanks for clearing it up!
Thanks for clearing it up!