Please help...03 mach1 FBGI0 stock tune.

European strategy specific for 2004 ford mustang euro spec but also modified by SVT and used on the 03/04 cobra. Can be used on all 2002-2004 mustang v8 and v6 manual and automatics. Supports automatic 4r70w control. Can be used on 2001-2004 ford F-150 4.6 / 5.4 ecu's if configured correctly as well.
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Please help...03 mach1 FBGI0 stock tune.

Unread post by Red Mach1 »

Hello guys. I have 03 mach1, need tune my pcm. Have anyone stock 03 mach1 binary converted to FBGI0 please? I dont have FBFG2 strategy for RYAK1 in tuner pro, ryak1 not properly displayed parameters with FBGI0.
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by bad86capri »

If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by Red Mach1 »

bad86capri wrote: 2022 Nov 26, 17:13 If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!
I have relatively stock car, only need adjust some parameters, maybe FBFG2 strategy works on our cars, not actual but for some adjust could by done but FBFG2 can not find too...maybe somebody still have FBFG2 in laptop?
bad86capri
Posts: 163
Joined: 2021 Feb 16, 10:09
Location: Knoxville, TN
Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by bad86capri »

My car is stock with longtube headers, X-pipe and 01 cobra intake cams. right now ive put 10 miles on it without the QH and im only running on 1 factory o2. its running the greatest as one can imagine. lol. hopefully tomorrow after church ill have time to put the QH in and start it with the FBGIO/MGZT bin and start tuning.
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by Red Mach1 »

Same. Stock engine only comp cams, xpipe. Car run without problems with stock ecu.
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by Red Mach1 »

Only idle rpm and timing idle need adjust.
Red Mach1
Posts: 18
Joined: 2022 Nov 25, 00:10
Location: Prague
Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by Red Mach1 »

Thanks sooo much to DECIPHA for mach bins
decipha
Posts: 4955
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Please help...03 mach1 FBGI0 stock tune.

Unread post by decipha »

np
Post Reply