EPA / Tuning

Decipha's custom GUFX strategy covers all 89-93 foxbody ecu's including the 88 mass-air california ecus.
entity-unknown
Posts: 80
Joined: 2022 Aug 04, 00:13
Location: Mesa, AZ
Vehicle Information: 87 Bronco FSB Eddie Bauer w/ 89 Mustang MAF Swap / C3W PCM w/ A9L2 BIN from Decipha / 347 FRPP BOSS Block (Part# M-6009-347) / AFR 165cc heads / 42Lbs Green(Active) & 30Lbs Red(Shelf) Bosch Injectors / CompCams 35-510-8/FW XE258HR-12 / AOD fully beefed up / King 2.5" Suspension w/ Bump Stops / 5.13 Gears Front/Rear on Auburn Pro LSD / 35"(Active)/33"/37" Tires / Very Custom Built Bronco aka Bonnie

EPA / Tuning

Unread post by entity-unknown »

So the tuning world just had a massive hit thanks to the EPA. How does it feel?
red5.0fogger
Posts: 148
Joined: 2021 Mar 22, 15:58
Location: Newington CT
Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s

Re: EPA / Tuning

Unread post by red5.0fogger »

can you be more specific? maybe throw a link?
entity-unknown
Posts: 80
Joined: 2022 Aug 04, 00:13
Location: Mesa, AZ
Vehicle Information: 87 Bronco FSB Eddie Bauer w/ 89 Mustang MAF Swap / C3W PCM w/ A9L2 BIN from Decipha / 347 FRPP BOSS Block (Part# M-6009-347) / AFR 165cc heads / 42Lbs Green(Active) & 30Lbs Red(Shelf) Bosch Injectors / CompCams 35-510-8/FW XE258HR-12 / AOD fully beefed up / King 2.5" Suspension w/ Bump Stops / 5.13 Gears Front/Rear on Auburn Pro LSD / 35"(Active)/33"/37" Tires / Very Custom Built Bronco aka Bonnie

Re: EPA / Tuning

Unread post by entity-unknown »

decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: EPA / Tuning

Unread post by decipha »

Thats nothing new.
entity-unknown
Posts: 80
Joined: 2022 Aug 04, 00:13
Location: Mesa, AZ
Vehicle Information: 87 Bronco FSB Eddie Bauer w/ 89 Mustang MAF Swap / C3W PCM w/ A9L2 BIN from Decipha / 347 FRPP BOSS Block (Part# M-6009-347) / AFR 165cc heads / 42Lbs Green(Active) & 30Lbs Red(Shelf) Bosch Injectors / CompCams 35-510-8/FW XE258HR-12 / AOD fully beefed up / King 2.5" Suspension w/ Bump Stops / 5.13 Gears Front/Rear on Auburn Pro LSD / 35"(Active)/33"/37" Tires / Very Custom Built Bronco aka Bonnie

Re: EPA / Tuning

Unread post by entity-unknown »

As I understand it the EPA has shutdown several tuners like COBB. Moates has no tuning hardware to sell for Ford anymore either.
Are you saying this is incorrect? Honest ?
Neald
Posts: 23
Joined: 2021 Oct 20, 09:37
Location: Poughkeepsie, NY, USA
Vehicle Information: 1989 Ford Bronco II
Stock 2.9 V6, A4ld trans.
CBAZA(6CYL Config)
Moates quarterhorse

Re: EPA / Tuning

Unread post by Neald »

Practically impossible to find any Quarterhorse, F3 and jaybird right now. I know this is for obd 2, but how about switching to a newer ECM and repining a bit and tuning with this..

https://www.drewtech.com/mongoose/ford.html
entity-unknown
Posts: 80
Joined: 2022 Aug 04, 00:13
Location: Mesa, AZ
Vehicle Information: 87 Bronco FSB Eddie Bauer w/ 89 Mustang MAF Swap / C3W PCM w/ A9L2 BIN from Decipha / 347 FRPP BOSS Block (Part# M-6009-347) / AFR 165cc heads / 42Lbs Green(Active) & 30Lbs Red(Shelf) Bosch Injectors / CompCams 35-510-8/FW XE258HR-12 / AOD fully beefed up / King 2.5" Suspension w/ Bump Stops / 5.13 Gears Front/Rear on Auburn Pro LSD / 35"(Active)/33"/37" Tires / Very Custom Built Bronco aka Bonnie

Re: EPA / Tuning

Unread post by entity-unknown »

Fortunately I got my QH and an extra F3v2 chip a few months before they listed everything out of stock :)
Post Reply