Speed Limiter Issue?

Used on mid 90s mass-air broncos and F-Series trucks. SMD-221 Hardware.
Cal Codes: HOG0, HOG1, TIP1, VEX1, WAY1
BOOSTED347
Posts: 11
Joined: 2021 Mar 15, 16:25
Location: Houston, Tx USA
Vehicle Information: 1992 Ford Mustang Lx
347 Stroker Turbocharged
A9L tuned on TunerProRT

Re: Speed Limiter Issue?

Unread post by BOOSTED347 »

It’s a 95 F150 with the lightning drivetrain. Using AHAC2 to tune it. Is there other things I can try to fix this issue or is it really because of the Inj dc maxing out?
decipha
Posts: 5033
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Speed Limiter Issue?

Unread post by decipha »

No if its hitting a limiter then the injector duty cycle is another issue altogether.

If that moved it then your either hitting that limiter still due to kam correction or you found another.

post the tune file
BOOSTED347
Posts: 11
Joined: 2021 Mar 15, 16:25
Location: Houston, Tx USA
Vehicle Information: 1992 Ford Mustang Lx
347 Stroker Turbocharged
A9L tuned on TunerProRT

Re: Speed Limiter Issue?

Unread post by BOOSTED347 »

95 F150 351W.bin
(56 KiB) Downloaded 188 times
Was able to post the tune
decipha
Posts: 5033
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Speed Limiter Issue?

Unread post by decipha »

give her a try
Attachments
95 F150 351W_tst2.bin
(56 KiB) Downloaded 186 times
BOOSTED347
Posts: 11
Joined: 2021 Mar 15, 16:25
Location: Houston, Tx USA
Vehicle Information: 1992 Ford Mustang Lx
347 Stroker Turbocharged
A9L tuned on TunerProRT

Re: Speed Limiter Issue?

Unread post by BOOSTED347 »

Currently out of town for work. Will give it a try once I get back.
decipha
Posts: 5033
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Speed Limiter Issue?

Unread post by decipha »

any luck?
BOOSTED347
Posts: 11
Joined: 2021 Mar 15, 16:25
Location: Houston, Tx USA
Vehicle Information: 1992 Ford Mustang Lx
347 Stroker Turbocharged
A9L tuned on TunerProRT

Re: Speed Limiter Issue?

Unread post by BOOSTED347 »

Was able to try it out and still doing it. I’m thinking it has to be the psom now because the needle started to bounce around. Only does it when in drive but not in manual 1st & 2nd
red5.0fogger
Posts: 150
Joined: 2021 Mar 22, 15:58
Location: Newington CT
Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s

Re: Speed Limiter Issue?

Unread post by red5.0fogger »

did you crank up the fuel pressure? Starving for fuel can seem like a limiter. Popping, missing breaking up or it just lays down. all could be from fuel. the 19# injectors are too small unless you crank up the pressure a D said.
Post Reply