EL falcon 6 cyl eec running 5.0 v8

Specific to none US ford tuning as some of the algorithms are slightly different.
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by decipha »

thats cuz theres a newer patch in the tune than in the xdf

it should have logged perfectly all you had to do is click the button
Jamie from oz
Posts: 28
Joined: 2022 Jul 08, 04:54
Location: South Australia
Vehicle Information: 1995 ford falcon ute 5.0 windsor efi

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by Jamie from oz »

ok i will load it again.
thank you
Jamie from oz
Posts: 28
Joined: 2022 Jul 08, 04:54
Location: South Australia
Vehicle Information: 1995 ford falcon ute 5.0 windsor efi

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by Jamie from oz »

just confirming that the A!C is 8061 processor ??

the HWAD3 (auto) and HWMC2 (manual) are 8065 processors.
i am slowly sorting out the tune and will post it soon .
Jamie from oz
Posts: 28
Joined: 2022 Jul 08, 04:54
Location: South Australia
Vehicle Information: 1995 ford falcon ute 5.0 windsor efi

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by Jamie from oz »

these are the TI Performance base files.
i dont think i changed them.
6dbd.bin goes with HWAD3


think i worked out how to attach as my computer skills are just above clicking a mouse hahaha.
6dbd.bin
(256 KiB) Downloaded 197 times
HWMC2_v13_256K.xdf
(119.04 KiB) Downloaded 194 times
HWAD3_v10_256K.xdf
(84.08 KiB) Downloaded 206 times
jsa
Posts: 260
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by jsa »

Jamie from oz wrote: 2022 Aug 14, 17:35 just confirming that the A!C is 8061 processor ??

Code: Select all

# Disassembly listing of binary 'A1C'    8061  1 bank     SAD Version 4.0.7.16b (11 Apr 2022)
# See 'A1C_msg.txt' for warnings, results and other information
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by decipha »

yes a1c is eec-iv 8061 ecu from 80s to 90s
Jamie from oz
Posts: 28
Joined: 2022 Jul 08, 04:54
Location: South Australia
Vehicle Information: 1995 ford falcon ute 5.0 windsor efi

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by Jamie from oz »

decipha wrote: 2022 Aug 16, 09:00 yes a1c is eec-iv 8061 ecu from 80s to 90s
This will be why his A1c_aussie_test bins will not data log on our 60 pin eec-v 8065 .

wasnt sure if he had done some hack to be able to try it on our ecu.
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by decipha »

yeah it shouldn't even execute
wwhite
Posts: 313
Joined: 2021 Feb 16, 15:53
Location: Victoria, BC, Canada
Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by wwhite »

decipha wrote: 2022 Aug 17, 07:50 yeah it shouldn't even execute
The 8065 uP will run 8061 software no problem, backwards compatible correct?

I'm going to go a different route with this.
The 6dbd.bin, is speed density and runs on 8065 correct?
My 351w is speed density, so...I'll take my EEC-V 104 pin and run the 6dbd single bank software on it.
Be intersting if it works, then the repinning, etc. etc.
jsa
Posts: 260
Joined: 2021 Feb 16, 15:46
Location: Australia
Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV

Binary Editor
ForDiag

Re: EL falcon 6 cyl eec running 5.0 v8

Unread post by jsa »

No, for starters the 8061 stack SFR address is different to 8065.
Post Reply