Does anyone know the best way to wire a 03 cobra engine into 89 mustang ?
I do not want to use Ron Francis wiring.
Thanks for any help
03 Cobra Swap
-
- Posts: 5033
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: 03 Cobra Swap
get an 01-03 f150 wiring harness
snatch an 03/04 luxury sedan ecu
go wire by wire and simplify it. When done you should have 3 wires. Ground, battery 12v constant power and ignition 12v.
details- http://www.efidynotuning.com/efiswap.htm
snatch an 03/04 luxury sedan ecu
go wire by wire and simplify it. When done you should have 3 wires. Ground, battery 12v constant power and ignition 12v.
details- http://www.efidynotuning.com/efiswap.htm
-
- Posts: 2
- Joined: 2022 Aug 08, 16:14
- Location: Austin TX
- Vehicle Information: 1989 Ford Mustang
Re: 03 Cobra Swap
I already have the ecu from the engine. All the harnesses that came
With it as well.
Should I still get the f150 harness or use the one that came with the donor 03 car?
With it as well.
Should I still get the f150 harness or use the one that came with the donor 03 car?
-
- Posts: 5033
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: 03 Cobra Swap
use the donor one
just go through and clean it up
pin out is on the homepage under reference
just go through and clean it up
pin out is on the homepage under reference