adx location?

Covers most all 98 fords including mustang v6, v8, cobra, lincoln town car, grand marquis and crown vic.
redtopracer
Posts: 97
Joined: 2021 Mar 24, 10:32
Location: springdale arkansas
Vehicle Information: 98 mustang gt 5 spd

adx location?

Unread post by redtopracer »

Tuning on a new laptop and dont have access to my adx file and I noticed there isnt one in the downloads anymore?
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: adx location?

Unread post by decipha »

your right i didnt post it

I'll dump it there in the AM
redtopracer
Posts: 97
Joined: 2021 Mar 24, 10:32
Location: springdale arkansas
Vehicle Information: 98 mustang gt 5 spd

Re: adx location?

Unread post by redtopracer »

Thanks!
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: adx location?

Unread post by decipha »

posted

new xdf as well

viewtopic.php?p=354
redtopracer
Posts: 97
Joined: 2021 Mar 24, 10:32
Location: springdale arkansas
Vehicle Information: 98 mustang gt 5 spd

Re: adx location?

Unread post by redtopracer »

Dude!


Soooo many new things to screw with lol! Was a little worried about granularity of control with almost a 12-1 static and no knock sensors, not so much now!

Questions

Im running an on3 320lph pump on my 98 gt. What Mhz should I hit her with in the FPUMP_FREQ scalar? Been having severe low RPM fueling issues, like it just aint coming sometimes.



Also, Im not sure if I fried my PCM or the cat layed on the laptop when I wasnt looking, but the damn thing refuses to go to CL logic after warmup. Drops from OL straight to OL-drive?
Attachments
42#new motor.bin
(256 KiB) Downloaded 197 times
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: adx location?

Unread post by decipha »

you don't its a simple on/off pump

no idea what your referring to as theres only an OL and CL indicator.
redtopracer
Posts: 97
Joined: 2021 Mar 24, 10:32
Location: springdale arkansas
Vehicle Information: 98 mustang gt 5 spd

Re: adx location?

Unread post by redtopracer »

Sorry, I use Forscan for diagnostics. Has the ability to show OL, OL-drive and OL-error

Forgot to set fn320 when I switched to the new bin.


Can you elaborate on the raw MAF transfer function you added?
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: adx location?

Unread post by decipha »

ah i see

not really much can be said about it. Its just the raw maf transfer for referencing. Its not something anyone would use.
redtopracer
Posts: 97
Joined: 2021 Mar 24, 10:32
Location: springdale arkansas
Vehicle Information: 98 mustang gt 5 spd

Re: adx location?

Unread post by redtopracer »

gotcha. When you change it, it changes the SP**MAF values. only reason I ask.


Ive managed to troubleshoot my problems down to fuel pressure issues. Still.


Im only getting 25psi at idle at the rail with an on3 320lph fuel pump and a brand new FPR. And around the 8-10min idling mark it drops further to 20psi. Also it doesnt climb when throttle is applied, it drops until high speed triggers. And even then, it only holds steady at its current pressure.

Ive set the fuel type switch to 0 for the unregulated return, ive even put 12v's in the voltage table for it.


Got any ideas what Im missing here? Am I chasing bits and bytes? electrons and relays? Possibly a physical hardware issue?
decipha
Posts: 4954
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: adx location?

Unread post by decipha »

yeah its going to as your changing the maf transfer. why would you do that?

there is no such thing as a regulated return as its a simple on/off pump. There is no voltage control since its not a returnless fuel system.

The ecu cannot control fuel pressure anymore than it can control tire pressure. Your fuel pump or fuel system is obviously malfunctioning.
Post Reply