[RWAI2] 01-03 F-150 Strategy getting scraped
-
decipha
- Posts: 4162
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
[RWAI2] 01-03 F-150 Strategy getting scraped
I will no longer be developing the rwai2 strategy. No point in wasting all that time as FBGI0 replaces all of it.
-
dleach1407
- Posts: 456
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: [RWAI2] 01-03 F-150 Strategy getting scraped
How do you determine which strategies can work on which hardware?
-
decipha
- Posts: 4162
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: [RWAI2] 01-03 F-150 Strategy getting scraped
the homepage click on supported ecu's and type the hardware code in the search box
-
dleach1407
- Posts: 456
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: [RWAI2] 01-03 F-150 Strategy getting scraped
I'm asking how you determine it. I know about the info on the home page.
-
decipha
- Posts: 4162
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: [RWAI2] 01-03 F-150 Strategy getting scraped
only 2 ways
the easiest is trial and error
the harder way is to disassemble the binary and identify all the bidi port registers and make sure they are the same or close enough that you can reassign them without too much effort.
the easiest is trial and error
the harder way is to disassemble the binary and identify all the bidi port registers and make sure they are the same or close enough that you can reassign them without too much effort.