upgrading to latest files

Decipha's custom GUFX strategy covers all 89-93 foxbody ecu's including the 88 mass-air california ecus.
PaulC-turbo5.0
Posts: 83
Joined: 2021 Feb 15, 21:56
Location: Lancaster New York
Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!

upgrading to latest files

Unread post by PaulC-turbo5.0 »

want to upgrade to the latest files to enjoy all of the recent improvements but have a few questions.

what is the best/easiest way to combine my current tune with the latest released stuff? I assume it will be to download and open the latest files and then run the compare feature in TP and copy over all of the important specifics from my working tune to the new file?

the other question is on the new approach toward the isc multiplier and dashpot. is there a way to convert what I have dialed in on my current tune to the new stuff or will I have no choice but to start fresh and re-dial these in?
dleach1407
Posts: 362
Joined: 2021 Mar 21, 15:17
Location: Colorado Springs, CO
Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors

57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold

Re: upgrading to latest files

Unread post by dleach1407 »

When i did mine, I just did a compare and moved all the data over to my new tune. In doing so I found a couple things that were not configured correctly so I fixed those at the same time.
PaulC-turbo5.0
Posts: 83
Joined: 2021 Feb 15, 21:56
Location: Lancaster New York
Vehicle Information: 1989 fox GT convertible
5.0 stock block, E7 heads, stock cam
Explorer GT40 intake flipped to driver side inlet
Single 67mm On3 BB turbo
Flipped JBA headers, custom SS 2.5" hotside built by me
custom 3" coldside thru On3 intercooler
tuning with Moates QH + TPRT
Dechipa's GUFX and supporting files, couldnt have tuned it myself without him!

Re: upgrading to latest files

Unread post by PaulC-turbo5.0 »

Thanks man this is what I ended up doing
Post Reply