Black TFI module
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Black TFI module
I was reading in the writeups that all 94+ cars are supposed to have a grey TFI module. I have a black one. Its a motorcraft unit. The spare I have is also a black motorcraft one. I cant know for sure if the one in the car is original but the spare one I have came from a 95 mustang I got out of a junkyard. Should I be disabling the CCD_SW?
-
- Posts: 1
- Joined: 2022 Feb 11, 18:50
- Location: Bismarck ND
- Vehicle Information: 1993 F250. 460. CBAZA T4M0. Quarterhorse. Binary Editor.
Re: Black TFI module
I read the opposite, that 94+ Fords need a black ICM.
https://www.ford-trucks.com/forums/1484 ... -96-a.html
https://www.ford-trucks.com/forums/1484 ... -96-a.html
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Black TFI module
Yeah, im confused because even the motorcraft TFI you can buy today at the autoparts store for the 94/95 are black. I spent a couple hours researching last night and I couldnt find a grey one even available for my car. Then I looked up the number on mine and it says its the original for a 94/95 mustang.
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Black TFI module
Anybody?
-
- Posts: 5051
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Black TFI module
black tfi is the ccd version for cbaza
gray tfi is the original old version used on the foxbodies. If u run it on a cbaza ecu u just disable the ccd sw.
if u have the wrong configuration you will get misfires over 4k usually.
which write up did u see that in ?
gray tfi is the original old version used on the foxbodies. If u run it on a cbaza ecu u just disable the ccd sw.
if u have the wrong configuration you will get misfires over 4k usually.
which write up did u see that in ?
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
-
- Posts: 320
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: Black TFI module
93 and earlier grey.
94 and later black.
All docs and parts stores get it wrong.
Assuming stock
94 and later black.
All docs and parts stores get it wrong.
Assuming stock