Which LS plug wires
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Which LS plug wires
There we go. Looks like we have everything to do it. I'll order the Ballenger connectors tomorrow probably
-
- Posts: 100
- Joined: 2021 Apr 14, 15:30
- Location: Portsmouth, Virginia
- Vehicle Information: 1994 Mustang
302W w/RZASA and CNP
YouTube: RinerAutomotive
Instagram: RinerAutomotive
Re: Which LS plug wires
In case you haven't seen this document, it's helpful too. But it's all pigtails.
https://www.fordservicecontent.com/pubs ... atalog.pdf
I'm trying to find the manufacturer part number of the connector, to see if I can find it cheaper. I like Ballenger, but $72 for 8 connectors is high. But they have done all the hard work of supplying terminals and seals. (Also just realized Ballenger is 2 hours from me).
Edit: I think I figured out its a TE MCON 1.2 housing (or at least similar enough to). Unfortunately it seems the keyway option the coils use (between pin 2 and 3) is the one that is restricted or out of stock at TE and distributors. So at this time it looks like Ballenger is only option.
https://www.te.com/commerce/DocumentDel ... -1718644-1
https://www.fordservicecontent.com/pubs ... atalog.pdf
I'm trying to find the manufacturer part number of the connector, to see if I can find it cheaper. I like Ballenger, but $72 for 8 connectors is high. But they have done all the hard work of supplying terminals and seals. (Also just realized Ballenger is 2 hours from me).
Edit: I think I figured out its a TE MCON 1.2 housing (or at least similar enough to). Unfortunately it seems the keyway option the coils use (between pin 2 and 3) is the one that is restricted or out of stock at TE and distributors. So at this time it looks like Ballenger is only option.
https://www.te.com/commerce/DocumentDel ... -1718644-1
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Which LS plug wires
Yeah, it sounds like we found the pigtails. I agree 9$ a piece is expensive but im not that worried about it. My coils should be in stock this week and I should have them sometime next week or the following week. Hopefully before February. Im getting really close to having all the parts to get this beast started.