When swapping a black module for a grey module, as well as swapping EEC-IV that has CCD,...
I've read something about PIN#4 having a resistor in the harness with the PS TFI.
Does the wiring harness need to be modified as well?
Anything else need to be done when swapping a 1991 EEC-IV to a 1995 EEC-IV?
PS TFI(grey) vs CCD TFI(black)
-
- Posts: 5044
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: PS TFI(grey) vs CCD TFI(black)
You can simply set it for a non ccd tfi.
-
- Posts: 320
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: PS TFI(grey) vs CCD TFI(black)
Is it the IGN_TYPE, change it
- from stock: 1 = TFI_ICCD
- to modified 0 = TFI
That's all?
- from stock: 1 = TFI_ICCD
- to modified 0 = TFI
That's all?
-
- Posts: 5044
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: PS TFI(grey) vs CCD TFI(black)
its that simple