2006 Mustang & 1993 MarkVIII engine and transmission

Place for your vehicle notes and blow-by-blow build threads.
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by decipha »

No your not using the mustang pcm or harness so you dont have to do anything with it just leave it be.
Pguercio1
Posts: 22
Joined: 2021 Aug 22, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

Hi Michael,
I’ve got most of the wiring done,
The only ones I’m not sure about where to
plug into on the Lincoln harness are;

Pin 8 fuel pump monitor
Pin 18 data +
Pin 19 data -
Pin 22 enable fuel pump output

The rest I got!
Please if you could help, it would be appreciated
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by decipha »

fpm is to check the fp relay works you dont need it

- and + are for the dtc connector, you dont need it

22 is the fp relay ground trigger output. You wire that up to your fuel pump relay ground trgger.
Pguercio1
Posts: 22
Joined: 2021 Aug 22, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

Ok great
I’ll finish it tomorrow night
One other question and I should be in good shape,
The Mustang instrument cluster how do I hook that up, since I’m not using the Mustang’s ECM ?
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by decipha »

You don't the old ecu doesnt support it.
Pguercio1
Posts: 22
Joined: 2021 Aug 22, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

Ok
So what do I do about the gauges
instrumentation? Any suggestions?
Pguercio1
Posts: 22
Joined: 2021 Aug 22, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

How can I get the cooling to run properly?
Pguercio1
Posts: 22
Joined: 2021 Aug 22, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

Michael,
How do I get the cooling fan to run properly?
Pguercio1
Posts: 22
Joined: 2021 Aug 22, 22:46
Location: Edmonton Alberta Canada
Vehicle Information: 2006 Ford Mustang with
4.6l DOHC from 93 Mark VIII

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by Pguercio1 »

Hi Michael,
I’ll hook up the VCRM for the cooling
fans to work properly, the only issue left
is the gauges…any suggestions?
decipha
Posts: 4957
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 2006 Mustang & 1993 MarkVIII engine and transmission

Unread post by decipha »

you can get a gps speedo, thats about it otherwise you'd have to swap ecu's or swap in the old lincoln cluster which is analog
Post Reply